Use of deer antler protection

One of the safest protections on the wall is deer antler, which has a life as long as your building and takes good care of the safety of your life and property. This type of protection is made with special tools and knowledge.

Why use a deer horn shield?

Deer antler is one of the types of effective protection in protecting buildings and privacy. By installing deer antlers on the walls of the building, you can simply not be seen from the outside and reduce the possibility of burglars stealing the building. Also, because it is natural and similar to trees, it blends well in the green and natural environment and gives a beautiful effect to the building. By installing deer antler guards, the possibility of burglars infiltrating into the courtyard and the privacy of the building is reduced, thus improving the security of the building. Also, due to its high resistance to weather conditions and the need for low maintenance, deer antler is used as a sustainable and cost-effective solution to protect buildings. Deer antler is designed as a new and effective type of protection in building security. Due to the shortcomings of the old guards and their security problems, the deer antler model with new designs and advanced technologies is used as an effective solution in protecting buildings and privacy. Having a structure similar to tree branches, deer antlers blend well with the facade of the building and do not reduce the appearance of the building. Also, having a multi-layered structure, it has advantages such as high resistance to weather conditions, the ability to install at high altitudes and reduce the possibility of thieves breaking into the building. In addition, having a very special structure, deer antlers have advantages such as being difficult for thieves to pass over, as well as reliability against cutting and breaking. As a result, deer antlers are recommended by experts in the construction industry as a new and effective solution in protecting buildings and privacy. In a summary about the reason for choosing deer antlers, it should be said that this protection is made of metal rods with sharp edges, which in addition to beauty, also provides the possibility of increasing the risk of thieves passing through. Also, due to the volume and density of the metal bars, it is very impenetrable and with the width covering on the wall, thieves are prevented from climbing the wall. The use of metal in the construction of the guard makes it highly resistant to impact, scratches and corrosion. Installation of deer antlers is also very simple and easy and can be installed on all kinds of walls. Also, the price of deer antlers is very reasonable compared to other guards and there are various models to coordinate with the facade of the building.

Differences of deer horn shields with cascade shield

The main difference between the deer antler and the waterfall guard (bar-spear) is in the deterrence and transverse coverage of the guard on the wall. Deterrence - deer antlers with a density of metal rods and sharp points that are irregularly connected together, by creating the right volume on the wall and at the right height, prevent people from passing and have more deterrence than the cascade protection. In cascade protection, thieves can easily climb the wall and try their luck to get through it. Full protection cover on the wall - deer antler with a transverse cover on the wall, prevents the thief from climbing up and standing on the wall. While in cascade protection, there is no transverse covering on the wall and its bars help the thief to climb the wall. Due to these differences, deer antlers are used as a deterrent and security solution for buildings.

Is the deer horn protection resistant to rain and cold weather?

Typically, deer antlers are made of metal and are generally resistant to rain and cold weather. However, it can have different resistances depending on the type and type of metal used and how it is installed and maintained. If the deer antler is made of metals with a stainless coating, it is relatively resistant to moisture and rain. It will be good. Also, if the installation and maintenance is done correctly and the deer antler is not exposed to cold weather and long-term humidity, it can have good resistance to cold weather. However, it is better to ask the manufacturer or seller about its resistance to rain and cold weather before installing the deer antler, and optimize it by observing the installation and maintenance tips.

Tips required to install and maintain deer horn shield

To install and maintain deer horns, it is better to pay attention to the following points; Correct Installation - Deer antlers must be installed correctly to provide proper deterrence and security. For this purpose, it is better to entrust its installation to skilled experts. Use of the right kind - When choosing deer antlers, it is better to use the right kind. Deer horns are usually made of metals such as steel, aluminum, or iron, and it is better to use quality material with a stainless coating. Maintenance - Regular cleaning and maintenance is very important to maintain the deterrent power and strength of deer antlers. If you use strong detergents, test them on a small part of the guard before using them. Avoiding excessive density - it is better not to increase the density of deer antler sticks and branches; Because it may reduce the penetration of light and air. Replacement of damaged parts - If the deer antler parts are damaged, replace them. It is best to have stock parts available for immediate replacement. Compliance with safety principles - When installing and maintaining deer antlers, pay attention to safety principles and use appropriate tools and equipment. Also, if needed, don't forget safety equipment such as a hat and work gloves.

Strength and beauty

In addition to its strength, deer antlers have very beautiful and elegant designs that can be easily matched with the facade of your building with various colors.

The color of the deer horn

Deer antler paint is divided into two categories: liquid paint and kiln paint. The traditional way to paint deer antlers is to use liquid paint. In this method, the protector is immersed in a tub full of liquid paint and then dried. This method is simpler and less expensive than kiln paint. However, liquid paint has less resistance to cold and heat and impact than furnace paint. Electrostatic furnace paint is the best way to paint deer antlers. In this method, electrostatic powder colors are used, which are carefully sprinkled on the entire surface of the deer antler. Then the protector is placed inside the paint oven at a certain temperature so that the powder paint is baked and sticks to the metal surface. This method is very popular today because of its durability and higher resistance than liquid colors.

The size and height of the deer horn

The size and height of deer horns can be in the range of 50 to 200 cm; But in order to build deer antlers on the wall, one should pay attention to various factors such as the security of the area, the height of the wall, and the neighboring walls. However, it is suitable to use a guard with a height of 90 to 120 cm. In this height range, hafaz is considered as an effective protector and is approved by police and security experts. In some cases, it may be necessary to use a guard with a higher height in some corners and angles; But this need exists in projects with special conditions.

Pimples of deer horn

Deer antler welding is done by two methods: electrode welding and welding under CO2 gas. Each of these methods has its own characteristics and advantages and disadvantages. Electrode welding has disadvantages that can in some cases reduce the quality of the weld and also reduce the useful life of deer antlers. The weakness of this welding method is the formation of weld mud, which reduces the strength and stability of the weld. Also, if the welder does not have enough skill and does not use proper force during electrode connection, a weak and breakable weld is formed. Welding under CO2 gas has advantages and features that are recommended compared to the disadvantages of electrode welding. Among these advantages is preventing air from entering the welding point and creating a vacuum and corrosion of the weld, which causes a more complete and stronger weld. Also, by using welding under CO2 gas, it is possible to connect cast iron alloy to metal, which is not possible with electrode welding. For this reason, welding under CO2 gas is recommended as an advanced welding method.